 Shift coupler question, Are there different bushings? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| robkammer |
 Jul 24 2022, 09:11 AM
Post
#1
|
|
Robbo  Group: Members Posts: 262 Joined: 7-January 21 From: Vermilion Ohio Member No.: 25,049 Region Association: NineFourteenerVille  |
Hey Teeners, Just finished the shifter bushing in my SC and had great results. Figured I should do the BB as well to get some of the slop out. I started at the coupler and firewall, found the bushing had blown out and the coupler wasn't too bad. But since I had new bushings in hand I easily pulled the coupler apart and then found that the new bushings were not correct. The ID is way too large. Bought them from the local Porsche dealer in a weak moment of impatience. Parts bag shows 964-424-223-01. Ran the number on Pelican and their site says they are correct.
Please take a look at the photo and you'll see the problem. Obviously I can;t cal anyone today but I'm wondering if anyone has seen this before? The SC calls for a very similar bushing but it is a different part number, ending in 02. My pin measures 12mm and the bushing ID is a bit over 13mm. Thanks for reading this and any suggestions. Rob  |
   |
 
|
  |
Replies
| robkammer |
Jul 24 2022, 11:00 AM
Post
#2
|
|
Robbo Group: Members Posts: 262 Joined: 7-January 21 From: Vermilion Ohio Member No.: 25,049 Region Association: NineFourteenerVille |
That is the new bushing in the photo. From my experience with my SC coupler, the pin is a nice tight interference fit. These new bushings fit like 40 year old worn bushings.
|
|
|
|
Posts in this topic
robkammer Shift coupler question Jul 24 2022, 09:11 AM
rgalla9146 There are two (now maybe three ?) versions of that... Jul 24 2022, 10:15 AM 914Sixer Yes, there is a bunch of crap out there. Stay awa... Jul 24 2022, 12:09 PM Mikey914 We have made a bushing that actually requires the ... Jul 25 2022, 12:24 AM 930cabman had my local machinist make all of the shift rod b... Jul 25 2022, 04:57 AM GregAmy If you want to replace the bushings with a real jo... Jul 25 2022, 05:57 AM 914Sixer Another upgrade is to use the later 911 coupler mi... Jul 25 2022, 08:28 PM robkammer Thanks Everyone. I have a set coming from AA, thei... Jul 26 2022, 06:23 AM
930cabman
Thanks Everyone. I have a set coming from AA, the... Jul 26 2022, 06:41 AM Superhawk996
I cannot understand either, how can the factory s... Jul 26 2022, 07:30 AM bkrantz
I cannot understand either, how can the factory ... Jul 26 2022, 08:33 PM Mikey914 Hint - They don't make most of the parts they ... Jul 26 2022, 03:10 PM robkammer Of course they don't Mikey. Hardly anyone does... Jul 26 2022, 07:37 PM Superhawk996
Of course they don't Mikey. Hardly anyone doe... Jul 27 2022, 05:46 AM rgalla9146 Back to the original question......
Is the orig... Jul 27 2022, 03:53 PM Superhawk996
Back to the original question......
Is the ori... Jul 28 2022, 07:25 AM Mikey914 The Originals were not round, but compress. Jul 27 2022, 10:52 PM dr914@autoatlanta.com yes coupler bushings were shared with 356 911 912 ... Jul 28 2022, 08:39 AM robkammer Hey Teeners, After waiting a week for parts and a ... Jul 31 2022, 08:26 AM rhodyguy Who was the vendor? Old pin or new pin? Jul 31 2022, 08:32 AM robkammer
Who was the vendor? Old pin or new pin?
AA, old ... Jul 31 2022, 09:35 AM rgalla9146 The originals on our 914s with side shifters were ... Jul 31 2022, 11:34 AM rgalla9146 Weltmeister at PartsKlassik Jul 31 2022, 01:57 PM robkammer Good news finally! After the dealer bushings d... Aug 5 2022, 10:52 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd April 2026 - 11:40 AM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.