“stock” 911 mufflers that will fit a 914/6 Options

[arbitrary]

Valance issues aside, will most/all early 2-in 2-out 911 mufflers/silencers fit a 914/6? I ask because I’m thinking of something sportier-sounding for my 914/6 conversion and I wanted to explore off-the-shelf options from Dansk and others.

My understanding is that a standard 2-in 1-out 914/6 muffler is the same as an early 911 except that the tailpipe angle is different.

[Root_Werks]

I bought a section of SS 90degree pipe, cut and welded on the new tail pipe in the preferred location. I believe if you have a 1973 and earlier 911 muffler as others have stated, the tail pipe exits out the 4cyl valance cutout fine.

[mb911]

I bought a section of SS 90degree pipe, cut and welded on the new tail pipe in the preferred location. I believe if you have a 1973 and earlier 911 muffler as others have stated, the tail pipe exits out the 4cyl valance cutout fine.

I think issue with yours was one of the initatial runs and George Rudawsky and I worked on his car to get them right. Eventually went to the pre 74 orientation. Unfortunately I am no longer involved in any stainless products(at least for now) so I am not doing any r&d and forget exactly. There is a new player in that arena and I am sure he will eventually get into details of differences.