 A-arm u-tab dimension? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| RustyWa |
 Jan 14 2005, 05:32 PM
Post
#1
|
|
Working Member  Group: Members Posts: 610 Joined: 2-January 03 From: Kent, WA Member No.: 72  |
So what is the dimension for locating the u-tabs on the a-arms? I've seen it different ways. The Pelican article gives one dimension but they don't say from where to where....
I'm going to try and weld these on this weekend. At least the welds will be horizontal flat, so it should be fun.... (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif) Thanks. |
   |
 
|
  |
Replies
| SirAndy |
Jan 14 2005, 05:47 PM
Post
#2
|
||
|
Resident German Group: Admin Posts: 41,688 Joined: 21-January 03 From: Oakland, Kalifornia Member No.: 179 Region Association: Northern California |
i did a "custom" location/rotation because of the droplinks. they would bind on the u-tab if the bar is set on full soft or hard. i turned them 90 deg. and now it's just fine. in this configuration, they will bind if the suspension is fully unloaded (like when the car is on the lift) but otherwise clear. the best location for you depends on your sway-bar. you want the droplink to go down in a straight line when the car is loaded (on the ground). (IMG:http://www.914world.com/bbs2/html/emoticons/cool.gif) Andy Attached image(s) 
|
||
|
|
|
||
Posts in this topic
RustyWa A-arm u-tab dimension? Jan 14 2005, 05:32 PM
Jeroen here's were I put mine (same location as stock... Jan 14 2005, 07:54 PM RustyWa Thanks guys. I'll try to get them on this aft... Jan 15 2005, 01:26 PM
RustyWa Ok got the u-tabs welded in...and my welding skill... Jan 15 2005, 07:41 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 16th June 2024 - 04:44 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.