 6 Cylinder oil temp gauges. |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| nein14-6 |
 Jan 12 2005, 12:33 PM
Post
#1
|
|
Member  Group: Members Posts: 93 Joined: 4-October 04 From: Mount Airy, MD Member No.: 2,883  |
Do the US-spec temp gauges correspond to a US-spec temp sending unit, likewise a German gauge to a German sending unit? What happens if you use a German gauge with a US sending unit, are the readings accurate, high, or low?
Thanks |
   |
 
|
  |
Replies
| Dave_Darling |
Jan 15 2005, 12:17 AM
Post
#2
|
|
914 Idiot Group: Members Posts: 15,196 Joined: 9-January 03 From: Silicon Valley / Kailua-Kona Member No.: 121 Region Association: Northern California 
|
The 911 temp gauge would read incorrectly if you used the 914-4 sender. I don't remember if it would read too high or too low, but it would be off.
The dual pressure senders (i.e., both light and gauge) on the 914 are all aftermarket. I have heard from one source that the resistance range used on the aftermarket senders is the same or "close" to that used by the 911 gauges. I don't know this for a fact, though. If so, you could just plug in a 911 pressure gauge to the aftermarket 914 dual pressure sender. --DD |
|
|
|
Posts in this topic
nein14-6 6 Cylinder oil temp gauges. Jan 12 2005, 12:33 PM
MXMARK I don't know if your question has been answere... Jan 13 2005, 12:41 PM Dave_Darling There is no "US-spec sending unit", nor a "US-spec... Jan 13 2005, 05:34 PM nein14-6 So the oil temperature/pressure gauge that has bar... Jan 14 2005, 06:21 AM Dave_Darling The original Six gauge was not numbered.
I am tol... Jan 14 2005, 03:33 PM Aaron Cox now here is another fine question....
i have a ST... Jan 14 2005, 04:39 PM
J P Stein Oil temp sender/with numeric gauge 65-77.......901... Jan 15 2005, 01:30 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 4th July 2025 - 12:46 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.