 Targa Top Issues, Loose |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| NARP74 |
 Sep 5 2022, 08:52 AM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,445 Joined: 29-July 20 From: Colorado, USA, Earth Member No.: 24,549 Region Association: Rocky Mountains  |
I have noticed some creaking coming from the rear targa top area when I drive. I lifted up on all four corners of the top and the right rear is loose. Even when the top is latched, I can lift it up a bit. That is probably my issue, but what is the fix?
|
   |
 
|
  |
Replies
| jim_hoyland |
Sep 5 2022, 09:57 AM
Post
#2
|
|
Get that VIN ? Group: Members Posts: 9,956 Joined: 1-May 03 From: Sunset Beach, CA Member No.: 643 Region Association: Southern California 
|
I recently went through the same thing,right rear corner creaked. Keith (914Toy) helped to fix mine. With the top off, he used a C-Clamp to bend the hook part of the latch down.It doesn't much bending, 1/4" at most.
Since one of my latches was bad,I replaces both with Bruce Stone rebuilds. They worked perfect.Only problem was getting the targa pad off..... I also replaced the rear targa top seal |
|
|
|
Posts in this topic
NARP74 Targa Top Issues Sep 5 2022, 08:52 AM
NARP74 I keep hearing about the pad replacing being a tou... Sep 5 2022, 10:06 AM scallyk9 You can also slide a short length of plastic or ru... Sep 5 2022, 12:20 PM
FL000
You can also slide a short length of plastic or r... Sep 5 2022, 02:45 PM porschetub
I have noticed some creaking coming from the rear... Sep 5 2022, 02:59 PM jim_hoyland Yes the targa pad removal is a bear the first time... Sep 5 2022, 03:04 PM bdstone914
I have noticed some creaking coming from the rear... Sep 5 2022, 07:41 PM 914GTSTI Anybody tried using shrink tubing ? Sep 6 2022, 12:43 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 8th December 2025 - 11:05 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.