Accelerator cable replacement, Dang its stuck any insight? - Problem Solved Options

[913B]

So the original came out fine. But the new one is stuck somewhere, I looked at tunnel pics and there isn't a break in the tube, or is there?

I pulled the rear tunnel access panel and pull the shifter out of the way but I don't really see anything

The worst part is I cannot even pull the new one back out, it is stuck somewhere and I don't want to yank or push too hard to F things more.

I thought this was a easy project but dammmmm

[jim_hoyland]

When mine stuck;
1 I sprayed the throttle body arm with silicon lube. Have to do this once or twice a year.
2. Once, the cable between the fire wall and the TB had a bend; not a smooth arc. That only happened once.
Of course there are other possible reasons; that was my experience.