 Accelerator cable replacement, Dang its stuck any insight? - Problem Solved |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 913B |
 Oct 7 2022, 04:04 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 847 Joined: 25-April 05 From: South Bay/SoCal Member No.: 3,983 Region Association: None  |
So the original came out fine. But the new one is stuck somewhere, I looked at tunnel pics and there isn't a break in the tube, or is there?
I pulled the rear tunnel access panel and pull the shifter out of the way but I don't really see anything The worst part is I cannot even pull the new one back out, it is stuck somewhere and I don't want to yank or push too hard to F things more. I thought this was a easy project but dammmmm |
   |
 
|
  |
Replies
| dr914@autoatlanta.com |
Oct 7 2022, 04:24 PM
Post
#2
|
|
914 Guru Group: Members Posts: 7,887 Joined: 3-January 07 From: atlanta georgia Member No.: 7,418 Region Association: None |
usually gets stuck in the mild curve at the back just in front of the backpad. If you remove the rear access plate and put a large pry bar against the top of the curve of the tube and just flex it a bit while someone is tugging on the cable it will probably come out. Make sure that you lubricate the tube before trying another installation
QUOTE(913B @ Oct 7 2022, 03:04 PM)  So the original came out fine. But the new one is stuck somewhere, I looked at tunnel pics and there isn't a break in the tube, or is there? I pulled the rear tunnel access panel and pull the shifter out of the way but I don't really see anything The worst part is I cannot even pull the new one back out, it is stuck somewhere and I don't want to yank or push too hard to F things more. I thought this was a easy project but dammmmm |
|
|
|
Posts in this topic
913B Accelerator cable replacement Oct 7 2022, 04:04 PM
jim_hoyland When mine stuck;
1 I sprayed the throttle body arm... Oct 7 2022, 04:22 PM 913B so I am able to pull the new one out with some sli... Oct 7 2022, 04:46 PM
bdstone914
so I am able to pull the new one out with some sl... Oct 7 2022, 08:15 PM VaccaRabite what brand cable are you putting in? Are the dime... Oct 7 2022, 07:37 PM 913B Its a coffle brand accelerator cable .
I measured ... Oct 7 2022, 10:28 PM Mikey914 When we 1st started to make accelerator cables, we... Oct 7 2022, 10:37 PM 913B Problem solved.
I ordered an OE Porsche cable tod... Oct 10 2022, 10:55 PM Craigers17
Problem solved.
I ordered an OE Porsche cable to... Oct 11 2022, 04:16 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd June 2024 - 09:08 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.