 914/6 Wiring Harness, Crusty original may need replacement |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Bullethead |
 Feb 5 2023, 02:56 PM
Post
#1
|
|
Oil Cooled heart  Group: Members Posts: 964 Joined: 24-June 10 From: South Florida Member No.: 11,875 Region Association: South East States 
 |
Began cleaning the wiring harness of the 914/6 GT replica today... it's crusty as expected. It's had the usual hacks and splices and looks like some dead ends, but I haven't tested it yet. Expecting the worst, I've sent a request to Kroon for pricing.
Can anyone recommend a stateside source for wiring looms? Experiences?  |
   |
 
|
  |
Replies
| davep |
Feb 5 2023, 06:16 PM
Post
#2
|
|
914 Historian Group: Benefactors Posts: 5,359 Joined: 13-October 03 From: Burford, ON, N0E 1A0 Member No.: 1,244 Region Association: Canada  |
I was rummaging through my stash of original harnesses, and found a 1974 in very descent shape. When I examined the fuse panel I found several of the spade connector were quite loose. They would not stay tight when reinserted. A closer look showed the curled sides of the connectors were fractured and would never make good contact. Too much of my LE harness was hacked (48000 total miles) so it is being replaced.
|
|
|
|
Posts in this topic
Bullethead 914/6 Wiring Harness Feb 5 2023, 02:56 PM
gms Restoration Design is stateside adjacent and I kno... Feb 5 2023, 03:57 PM BillJ Checked this last year. Was basically $3800 Feb 5 2023, 04:23 PM mepstein I would buy one of Aase’s NOS 914-4 harnesses an... Feb 5 2023, 06:37 PM
JeffBowlsby
I would buy one of Aase’s NOS 914-4 harnesses a... Feb 5 2023, 11:58 PM mepstein
I would buy one of Aase’s NOS 914-4 harnesses ... Feb 6 2023, 01:11 AM Bullethead
I would buy one of Aase’s NOS 914-4 harnesses ... Feb 6 2023, 07:37 AM JeffBowlsby
Jeff, I visited your site and saw you make quite ... Feb 6 2023, 09:10 AM Bullethead Thanks Glenn, I didn't realize they made them.... Feb 5 2023, 07:10 PM r_towle Jeff Bowlsby
https://bowlsby.net/914/WiringHarness... Feb 5 2023, 07:18 PM davep The whole steering column area is different betwee... Feb 6 2023, 08:39 AM Luke M
Began cleaning the wiring harness of the 914/6 GT... Feb 6 2023, 12:41 PM Bullethead Thanks to you all. Spoke with the nice people at R... Feb 6 2023, 02:53 PM mepstein
Thanks to you all. Spoke with the nice people at ... Feb 6 2023, 03:58 PM raynekat Fresh pliable wiring is definitely the way to go.
... Feb 6 2023, 11:13 PM Tom1394racing I bought the 914 six wiring harness from Restorati... Feb 7 2023, 06:57 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd April 2026 - 08:17 AM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.