![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
bkrantz |
![]()
Post
#1
|
914 Guru ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 8,360 Joined: 3-August 19 From: SW Colorado Member No.: 23,343 Region Association: Rocky Mountains ![]() ![]() |
I know we have threads about PO stupidity, but how about the dumbest 914 thing you have done?
I will start with a, ahem, senior moment I had today. When I tried to add oil after my recent engine re-installation, it would not go in. Short version: I forgot to remove the paper towels I had folded up and tucked into the breather recess while the engine was out of the car, to keep anything from falling into the case. I still can't believe that I installed the breather and did not see and remove paper towels. Attached thumbnail(s) ![]() |
![]() ![]() |
lolkema |
![]()
Post
#2
|
Newbie ![]() Group: Members Posts: 24 Joined: 17-July 05 From: Idaho, USA Member No.: 4,425 Region Association: None ![]() |
my brightest moment was when I had just finished a complete restoration on my wife's Beetle. I had spray painted it in my garage and was very happy with the result. I took it around the block for a first test run. I was 100 yards from my driveway when I noticed a wobble in the steering. First thought that I would look at it when I got it back in the garage. At 50 yards from home decided to stop and check, turned out I forgot to tighten the front wheel nuts, by that time I had lost 2 bolts on each side and the other bolts were hanging on by a thread. The wheels were angled 20 degrees outward. I think if I would have continued another 5 feet both wheels would have come off.
Felt pretty stupid after that one.... |
930cabman |
![]()
Post
#3
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 4,069 Joined: 12-November 20 From: Buffalo Member No.: 24,877 Region Association: North East States ![]() ![]() |
my brightest moment was when I had just finished a complete restoration on my wife's Beetle. I had spray painted it in my garage and was very happy with the result. I took it around the block for a first test run. I was 100 yards from my driveway when I noticed a wobble in the steering. First thought that I would look at it when I got it back in the garage. At 50 yards from home decided to stop and check, turned out I forgot to tighten the front wheel nuts, by that time I had lost 2 bolts on each side and the other bolts were hanging on by a thread. The wheels were angled 20 degrees outward. I think if I would have continued another 5 feet both wheels would have come off. Felt pretty stupid after that one.... Was anyone watching? (IMG:style_emoticons/default/shades.gif) |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 9th May 2025 - 01:52 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |