Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Leaking oil, pump
930cabman
post Jul 16 2023, 05:15 PM
Post #1


Advanced Member
****

Group: Members
Posts: 3,130
Joined: 12-November 20
From: Buffalo
Member No.: 24,877
Region Association: North East States



Fresh 2056 (2022) engine is running well, but a pesky oil leak has been a down side from day one. Need to be careful if parking at a friends (or enemies) driveway. I don't have 100% cure, but I have isolated it to the front seal/oil pump area over the past couple weeks. I was determined to find it this weekend and removed the engine bar, propped the engine up with a 4x4 and warmed her up good. It took awhile (170 ish oil temp) to get a leak going, but the studs/nuts holding the oil pump cover were leaking. The front seal area looks great, the gasket(s) between the oil pump/case and oil pump/cover look good also. Hopefully new sealing washers and sealing nuts will get things dried up.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
rfinegan
post Jul 17 2023, 09:44 AM
Post #2


Senior Member
***

Group: Members
Posts: 973
Joined: 8-February 13
From: NC
Member No.: 15,499
Region Association: MidAtlantic Region



VW Oil Pump Cover Plate Sealing Nut - 8mm

https://www.jbugs.com/product/111115161.htm...soaArqHEALw_wcB

These worked well on the T-1 30mm pump and put them on my t4 pump too
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
930cabman
post Jul 17 2023, 12:04 PM
Post #3


Advanced Member
****

Group: Members
Posts: 3,130
Joined: 12-November 20
From: Buffalo
Member No.: 24,877
Region Association: North East States



QUOTE(rfinegan @ Jul 17 2023, 09:44 AM) *

VW Oil Pump Cover Plate Sealing Nut - 8mm

https://www.jbugs.com/product/111115161.htm...soaArqHEALw_wcB

These worked well on the T-1 30mm pump and put them on my t4 pump too


Got em, they are on the way. Along with a soft (crush) washer, it should do the trick
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 2nd June 2024 - 03:54 PM