 Loose torsion bars, Newly rebuilt front suspension inc. wheel bearings, torsion bars after test drive were loose and caps rotated counter clockwise with wheels off. |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| LV2GOFAST |
 Sep 4 2023, 12:33 PM
Post
#1
|
|
Newbie  Group: Members Posts: 3 Joined: 28-February 14 From: Santa Clarita, CA Member No.: 17,050 Region Association: None  |
I rebuilt my 1975 914 1.8 front suspension including the wheel bearings. The ride hight was good and I proceeded to the test drive. After going over a speed bump I started hearing noises from the suspension. upon inspection with the wheels off I noticed the torsion bar adjustment cap had rotated counterclockwise, the adjuster screw no longer touched the stop and I was able to wobble the torsion bar/cap assemble on both sides.
Help please, what did I do incorrectly. There was no rust when disassembled! 
Torsion_Bar.MOV ( 524.08k )
Number of downloads: 63 |
   |
 
|
  |
Replies
| iankarr |
Sep 4 2023, 01:39 PM
Post
#2
|
|
The wrencher formerly known as Cuddy_K Group: Members Posts: 2,556 Joined: 22-May 15 From: Heber City, UT Member No.: 18,749 Region Association: Intermountain Region 
|
My guess is that the splines weren’t firmly seated
|
|
|
|
Posts in this topic
LV2GOFAST Loose torsion bars Sep 4 2023, 12:33 PM
914Sixer Levers have to be clocked when installing. Read u... Sep 4 2023, 12:44 PM jim_hoyland ? What made them come loose ? Sep 4 2023, 01:04 PM
brant
My guess is that the splines weren’t firmly sea... Sep 4 2023, 02:29 PM Superhawk996 If LCA bushings were replaced, I’ll bet LCA bush... Sep 4 2023, 02:13 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 11:21 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.