12vdc AC Compressor on Amazon, Looks interesting if you have an alternator to run it. |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
12vdc AC Compressor on Amazon, Looks interesting if you have an alternator to run it. |
Steve |
Sep 4 2023, 08:09 AM
Post
#1
|
914 Guru Group: Members Posts: 5,608 Joined: 14-June 03 From: Orange County, CA Member No.: 822 Region Association: Southern California |
https://www.googleadservices.com/pagead/acl...ct=1&adurl=
Just add Under Dash Evaporator, Condenser and dryer! Example install, but mine is a Benling |
Superhawk996 |
Sep 4 2023, 02:02 PM
Post
#2
|
914 Guru Group: Members Posts: 5,885 Joined: 25-August 18 From: Woods of N. Idaho Member No.: 22,428 Region Association: Galt's Gulch |
Tangent:
Anyone ever documented the dealer installed systems? They were R-12 systems but could be used to infer sizing and efficiency of something more modern. I took a DPD system off my car and scrapped it and didn’t think to measure what it was assuming info was readily available but I haven’t run across it clearly documented. Compressor: York - but wonder what the displacement was. Evaporator size: ? Condenser size:? I guess I could estimate based on the size of the hole cut into my frunk. (IMG:style_emoticons/default/headbang.gif) VPC manual specifies 19” x 13” cutout for condenser. Oil capacity: 28 oz according to VPC manual Refrigerant: 2 1/2 lbs according to DPD manual Pulley ratio: ? |
Steve |
Sep 5 2023, 08:35 AM
Post
#3
|
914 Guru Group: Members Posts: 5,608 Joined: 14-June 03 From: Orange County, CA Member No.: 822 Region Association: Southern California |
Tangent: Anyone ever documented the dealer installed systems? They were R-12 systems but could be used to infer sizing and efficiency of something more modern. I took a DPD system off my car and scrapped it and didn’t think to measure what it was assuming info was readily available but I haven’t run across it clearly documented. Compressor: York - but wonder what the displacement was. Evaporator size: ? Condenser size:? I guess I could estimate based on the size of the hole cut into my frunk. (IMG:style_emoticons/default/headbang.gif) Oil capacity: ? Pulley ratio: ? Auto Atlanta sells the factory AC installation guide. I have also seen pirated factory AC pdf's floating around. The manual has all the specs and dimensions. If your running a 914-6 front oil cooler, its easier to put an aftermarket condenser in front of it versus cutting your floor for the dealer 4 banger version. |
Lo-Fi Version | Time is now: 4th June 2024 - 02:28 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |