D - Jetronic female connector Options

[Villemi]

Hello,

We know on our D -Jetronic harness some male connectors 2,3,4,5 ways with female connectors with female pins inside.

(IMG:http://www.914world.com/bbs2/uploads_offsite/i48.servimg.com-23807-1640445696.1.jpg)

Do you know female connectors with male pins inside. ?


I need your help because I want to use on my 914 Porsche a 123 ignition distributor.
For the OEM distributor I have a 3 ways female connector and for the harness 3ways male connector
I'd like to make a little harness with a 3 ways male on one side and 3 ways female connector on the other side
It's easy to find male connectors with female pins but I don't find female connector with male pins.

Do you know where I can find these parts ?

The advantage of this little harness is if I have problems with the 123 ignition distributor I can use my OEM one without harness modification.

Can you help me please ?

PS: what is the item number of these D-Jetronic connectors ?

Best regards

Michel

[Superhawk996]

2012 BMW - 138k miles
Note the varying use - standard connections on non-emissions, non safety components.

There is a boot used on the EGR cooler. An emissions related component. The throttle stepper motor also has a boot because the throttle motor is a safety component. When a boot like this is used, the wiring must be secured nearby to ensure the boot isn’t supporting the wiring which will tend to cause intermittent connectivity issues and/or pin pullout. The wiring for the throttle motor is secured at the locations of the orange arrows to help mitigate those risks.