Fuse Panel, BRAND NEW PRODUCT Options

[peteyd]

We have been working on this product for the past several months. I have waited to post this because we wanted to get it right and some road time as well. I recently have seen some members talk about updated fuse panels similar to the JWest so I did not want to delay this any further.

• Porsche 914 Fuse panel with modern style ATO fuses
• Design is on a circuit board with Glow to blow LED indicator. The LED on the board lights up when you blow a fuse.
• Nylon base which holds the board and OEM or reproduction fuse panels covers (we will be selling the kit with Auto Atlanta covers)
• Aluminum base panel that holds the original relays and mounts to the original points. These will be supplied anodized black
• Sleek minimalist design.
• We will include instruction(video & paper) for installation. Pin arrangement is same as the OEM and no modification is required for the existing harness.
• All fasteners required for mounting included.
• Scheduled for release first week of August.

Price point will be $250-$300 USD per unit. We look at this product being a premium product with attention to detail.

If you're interested in the product please call in, and we can add you to the list.

Peter
Restoration Design

[JeffBowlsby]

Peter, great concept and looks good quality, obviously a lot of effort to design and produce these. Kudos. A couple of questions:

* Will your fuse panel body fit the factory mounting plates if we drill the end holes?

* Similarly do we need to use your mounting plate or can we use the factory plate? Asking because there are at least 4 different factory plates which hold different arrangements of the relays and your plate does not match any of the factory hole patterns.

* Please describe how your fusepanel busses those certain specific circuits together as on the factory fusepanel, as the busses are not evident in the photos posted.