D - Jetronic female connector Options

[Villemi]

Hello,

We know on our D -Jetronic harness some male connectors 2,3,4,5 ways with female connectors with female pins inside.

(IMG:http://www.914world.com/bbs2/uploads_offsite/i48.servimg.com-23807-1640445696.1.jpg)

Do you know female connectors with male pins inside. ?


I need your help because I want to use on my 914 Porsche a 123 ignition distributor.
For the OEM distributor I have a 3 ways female connector and for the harness 3ways male connector
I'd like to make a little harness with a 3 ways male on one side and 3 ways female connector on the other side
It's easy to find male connectors with female pins but I don't find female connector with male pins.

Do you know where I can find these parts ?

The advantage of this little harness is if I have problems with the 123 ignition distributor I can use my OEM one without harness modification.

Can you help me please ?

PS: what is the item number of these D-Jetronic connectors ?

Best regards

Michel

[FlacaProductions]

Hi @JeffBowlsby - thanks for this.
I'm with you on options 1 and 3 seeming most logical.
For those that are ordering a new 123, option 1 would have it shipped straight to you for the mod and then it'll be plug-n-play upon final delivery.

This might also be an option for people who have down time over the winter, etc when the 914 is off the road for a bit.

Personally, I'd opt for option 3 for myself right now as I probably have the crimper - or am not scared to get one - and have shrink tube and heat guns.

I'll most likely have the time to do this during the week of Aug 10-17. Tell me where to send $10!

Thanks Jeff!!