 No clutch free play |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| SWH |
 Aug 25 2024, 09:09 PM
Post
#1
|
|
Newbie  Group: Members Posts: 12 Joined: 27-April 24 From: Arizona Member No.: 28,084 Region Association: Southwest Region  |
I have rebuilt my 2.0L and am down to mating trans to motor. When I did this I noticed I have no free play in the t/o bearing arm. I have measured and does not appear to be pressing the pressure plate fingers but is on them. Is that acceptable? I expected to have some level of free movement in the arm. Is there something else I can check? Flywheel, clutch disc, pressure plate and Throwout bearing are all new. Crank, flywheel and pressure plate was balanced at machine shop. Except for the flywheel that was completely shot all measurements on new parts
 match old parts except slight wear on disc. Thanks, |
   |
 
|
  |
Replies
| rfinegan |
Aug 28 2024, 08:54 AM
Post
#2
|
|
Senior Member Group: Members Posts: 1,073 Joined: 8-February 13 From: NC Member No.: 15,499 Region Association: MidAtlantic Region 
|
iI the Pressure plate sticking on the locator pins? Try to remove the pins and mock up the assemble again and see if the fingers are compressing o the clutch
|
|
|
|
Posts in this topic
SWH No clutch free play Aug 25 2024, 09:09 PM
barefoot Put a thick washer under the throwout pivot, see i... Aug 26 2024, 06:44 AM
Dr Evil
Put a thick washer under the throwout pivot, see ... Aug 26 2024, 04:46 PM Shivers I had 6 vw bugs and a van before I got my 914. Whe... Aug 26 2024, 08:16 AM worn
I have rebuilt my 2.0L and am down to mating tran... Aug 26 2024, 02:45 PM SWH The pivot bolt behind the fork had 1 flat and 3 sp... Aug 26 2024, 04:43 PM 930cabman
The pivot bolt behind the fork had 1 flat and 3 s... Aug 27 2024, 05:38 PM Dr Evil The only way for the space between the TOB and pre... Aug 26 2024, 04:53 PM porschetub
I have rebuilt my 2.0L and am down to mating tran... Aug 27 2024, 01:56 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 10:46 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.