Puck for the horn, want dimensions Options

[worn]

Hi all y'all,
I am getting tired of having my horn go off at inopportune moments because I have nudged the butterfly on the steering wheel by mistake. Ahh, a smooth sharp left turn with great savor faire an... blaaaaahhhhhhhhhhhhh, dammit.

So I want to be a cool kid and have a puck button. But not at that price! (insert eye watering emoji) And of course I make everything myself anyway. So could someone give me the OD and ID and height in and out? I can work it out from there. Might go with aluminum but also might go with ebony or rosewood from scraps that I have. Thanks so much. If necessary, I can bring calipers to RRC, but online would be better. That way I won't lose the scrap of paper I have them written on.

I know that there is a 3D printer file but I don't think that I could unravel it to get the measurements.

Thanks so much.
Warren

[emerygt350]

I had to make up my dimensions on that file anyway. I have been meaning to go back and massage it a little, try to replicate some of the details like the ring etc... Is that decreasing diameter linear or just in a portion of the puck?

That said, I no longer accidently hit my horn. And I can see my dash better, although the fog lights button is a little bright.

[worn]

I had to make up my dimensions on that file anyway. I have been meaning to go back and massage it a little, try to replicate some of the details like the ring etc... Is that decreasing diameter linear or just in a portion of the puck?

That said, I no longer accidently hit my horn. And I can see my dash better, although the fog lights button is a little bright.

If you can get me the base OD and the inner ID that would be grand. The depth of the hole would help a lot too. Thanks folks for all the great help this time and lots of others.

[mepstein]

I had to make up my dimensions on that file anyway. I have been meaning to go back and massage it a little, try to replicate some of the details like the ring etc... Is that decreasing diameter linear or just in a portion of the puck?

That said, I no longer accidently hit my horn. And I can see my dash better, although the fog lights button is a little bright.

If you can get me the base OD and the inner ID that would be grand. The depth of the hole would help a lot too. Thanks folks for all the great help this time and lots of others.

You can get a lot of the dimensions from your batwing.

[worn]

[/quote]
You can get a lot of the dimensions from your batwing.
[/quote]
I plan to do that, but would rather have some help as well. My experience with measure twice cut once has been hit and miss at times.

[porschetub]

[quote name='worn' date='Sep 3 2024, 12:58 PM' post='3165217']
[/quote]
You can get a lot of the dimensions from your batwing.
[/quote]
I plan to do that, but would rather have some help as well. My experience with measure twice cut once has been hit and miss at times.
[/quote]
I built one with 914 rubber plastic housing ,the biggest cost is the chrome trim ,found the leather insert @ a fair price , but really not that cheap but result was what I wanted ,cheers.