Solvent HELP, Cannot find solvent to dissolve adhesive Options

[Gatornapper]

I love the black leather Dino steering wheel that is on my 944 S.

I want to put it on my 914.

So I got a tan Dino steering wheel to go in my 944 S that has a tan interior.

One problem - I can find no solvent to remove the adhesive from the new tan steering wheel. It had clear plastic protecting the chrome which pulled off easily. But I can find no solvent to dissolve the adhesive that held the clear plastic on.

I have tried gasoline, strong carb cleaner, brake cleaner, acetone, lacquer thinner, WD-40,
Seafoam, and even Super Glue Remover.

I can't take the nice wheel out of the 944 S until the new one can go in.

HELP. Looking for advice on a solvent that will dissolve this adhesive.

Pics below - many thanks to all suggestions.

GN

(IMG:http://www.914world.com/bbs2/uploads_offsite/hosting.photobucket.com-21449-1725409879.1.jpg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/hosting.photobucket.com-21449-1725409879.2.JPG)

[GregAmy]

Are you certain that this is just residual adhesive? Given none of the suggestions involved is working, I'm suspicious that the surface is physically damaged.

If that's the case then it's likely a physical re-polish requirement, such as what's done to sand off the fogged surface of old plastic headlights/covers.