Rear axle shaft question Options

[bossboy302]

'72 914-4

Starting axle/cv overhaul, only 2 CVs came off the shaft, other 2 not budging.

CV's feel crappy anyway, so thought of getting complete new shafts...
Can't seem to fine many places selling, if the do, they're 300-600???

What gives, why so scarce

And those of you who have bought recently...from where?

Thanks

[Jack Standz]

It is unlikely your axle shafts are the problem. So, if they're OK, just replace the CV joints.

Here is one location to get new ones:

https://pmbperformance.com/products/porsche...ro-cv-joint-kit

This could set you up for another 50 years. (IMG:style_emoticons/default/smile.gif)



Where did we recently get some axles? Rock Auto.

If you've converted your 914 to 5 lug with Euro hubs and other parts, it turns out that you can use new 2006 Pontiac GTO axles (part# GSP NCV10024). On closeout they went for $30 to $60.

[Montreal914]

If you've converted your 914 to 5 lug with Euro hubs and other parts, it turns out that you can use new 2006 Pontiac GTO axles (part# GSP NCV10024). On closeout they went for $30 to $60.

@Jack Standz Care to elaborate on this? (IMG:style_emoticons/default/idea.gif)

What makes the Euro (do you mean URO?) hubs different from the stock parts that would now allow the use Pontiac components? Wouldn't they also work on stock setup? (IMG:style_emoticons/default/confused24.gif)