914 2.0 injector issues, Help Options

[Vicioso]

I replaced my fuel injectors on my 2.0 - 4 and the car will not run it seam's like I'm getting fuel any ideas?

[Vicioso]

Yes I sprayed starter fluid and it ran great for about two seconds, the plugs were wet it seams like I'm getting fuel. the original injectors were a single spray the new ones have three outlets does that matter?

[fiacra]

Yes I sprayed starter fluid and it ran great for about two seconds, the plugs were wet it seams like I'm getting fuel. the original injectors were a single spray the new ones have three outlets does that matter?

Yes, if you use the wrong injectors you cannot expect the car to run properly. It has already been asked, but which injectors did you use? As far as I know the only suitable non OEM injectors that work are the Standard Motor Products FJ67 injectors. You can get your original injectors refurbished. Many of us use MrInjector. (Edit: I see you answered that question while I was writing this).

If the car ran fine, why did you replace the injectors? And, importantly, did it run fine AFTER all that other work and then you replaced the injectors and ran into your current problem. Whenever you touch something you have to eliminate it as a variable. As an example, did you check the fuel pressure after you replaced the fuel pressure regulator.

If the CHT is disconnected the car will run rich and will either not run or run poorly. Have you checked connections?

If you are not sure how to post pictures read the help section. Most of the time I will simply take them with my phone, email them to myself, resize them when emailing, and then post them from my computer.