 2.0 build to 2056 or 2270?, Which cam would be best ?? Going carburetorated, with 96mm pistons |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| zman914 |
 Dec 20 2024, 06:02 PM
Post
#1
|
|
Newbie  Group: Members Posts: 5 Joined: 25-July 23 From: Vacaville, ca Member No.: 27,483 Region Association: Northern California  |
Looking to do a 2056 or 2270 build from a stock 2.0. Changing over to carburetorated, with 96mm pistons.. Looking for good cam advise. I'm looking for more hp, but very reliable.
|
   |
 
|
  |
Replies
| iankarr |
Dec 20 2024, 07:32 PM
Post
#2
|
|
The wrencher formerly known as Cuddy_K Group: Members Posts: 2,595 Joined: 22-May 15 From: Heber City, UT Member No.: 18,749 Region Association: Intermountain Region 
|
Welcome, Zman!
Going to carbs opens up a ton of options for you. It really comes down to cost and skill. If you will be rebuilding the engine yourself and you haven't done it before, I'd probably go with a proven 2056 combination. Lots of those engines on the road with good reliability. Others can chime in with specifics. If you go up to 2270, the precision needs to be higher, so it's not something I'd attempt for my first build. You'll also need to think about supplemental oil cooling. Either way, you'll want to make sure the case checks out as a buildable core, with registers that are dead flat and parallel to the heads. I'd also swap the galley plugs for threaded ones. Good luck! |
|
|
|
Posts in this topic
zman914 2.0 build to 2056 or 2270? Dec 20 2024, 06:02 PM
r_towle Elgin camshafts Dec 20 2024, 07:48 PM
930cabman
Elgin camshafts
:agree:
Give Dema a call, he... Dec 21 2024, 01:09 PM cgnj I think you need to decide displacement before you... Dec 20 2024, 09:03 PM Jack Standz
Looking to do a 2056 or 2270 build from a stock 2... Dec 20 2024, 10:10 PM Dave_Darling With aftermarket rods, you should have very little... Dec 30 2024, 09:05 PM Jack Standz
[quote name='Jack Standz' post='3182448' date='De... Dec 31 2024, 04:22 AM technicalninja
I think you need to decide displacement before yo... Dec 20 2024, 10:26 PM mepstein We have our cam supplier (mostly Daugherty racing ... Dec 21 2024, 07:04 AM zman914 Thanks for all the replies!! I'm think... Dec 21 2024, 11:45 AM zman914 Hows the web cam #86? Anyone running that cam? Dec 21 2024, 11:56 AM cgnj @[url=http://www.914world.com/bbs2/index.php?showu... Dec 21 2024, 12:31 PM technicalninja
@[url=http://www.914world.com/bbs2/index.php?show... Dec 21 2024, 05:21 PM JamesM
Looking to do a 2056 or 2270 build from a stock 2... Dec 21 2024, 06:22 PM VaccaRabite I'm a big fan of the Web494 cam. Good torque,... Dec 23 2024, 06:58 AM barefoot
I'm a big fan of the Web494 cam. Good torque... Dec 23 2024, 07:50 AM VaccaRabite
I'm using the 494 in a 2056 with Dell 40... Dec 30 2024, 08:25 AM colingreene I built myself a 2258 on my first engine build for... Dec 31 2024, 06:45 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st April 2026 - 06:26 PM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.