 "Steering Bearing" torque setting, securing the bearing boot and bearing |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| captjm |
 Dec 27 2024, 10:06 PM
Post
#1
|
|
Newbie  Group: Members Posts: 16 Joined: 28-January 07 From: Temecula, CA Member No.: 7,485  |
There is a two bolt bracket that secures the steering gear shaft "steering bearing and rubber boot". How tight should these bolts be? The bolts are M8 x1.25 x15 mm socket head. I did not find a torque setting anywhere and securing them too tight might just damage the rubber? Any thoughts?
|
   |
 
|
  |
Replies
| bdstone914 |
Dec 28 2024, 04:12 AM
Post
#2
|
|
bdstone914 Group: Members Posts: 5,023 Joined: 8-November 03 From: Riverside CA Member No.: 1,319 |
I don't know of any rubber boot like you describe other than the one under the horn pad. 8m bolts typically need 20-30 ft lb torque.
|
|
|
|
Posts in this topic
captjm "Steering Bearing" torque setting Dec 27 2024, 10:06 PM
bdstone914 oops Dec 28 2024, 04:12 AM Montreal914 Maybe he is referring to the rubber coupling betwe... Dec 28 2024, 05:38 AM
bdstone914
Maybe he is referring to the rubber coupling betw... Dec 28 2024, 08:36 AM
captjm
Maybe he is referring to the rubber coupling betw... Dec 28 2024, 06:20 PM SirAndy :ttiwwp: Dec 28 2024, 11:48 AM Superhawk996 Good n’ tight is standard German torque when in ... Dec 28 2024, 09:52 PM captjm
Good n’ tight is standard German torque when in... Dec 29 2024, 08:25 PM technicalninja I'd clean the threads up and use a small dot o... Dec 29 2024, 09:04 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 4th July 2025 - 08:54 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.