 Empi heads and Cima/Mahle cylinders, Review of Empi heads and availability of Mahle cylinders |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Mr.Vman |
 Jan 31 2025, 06:01 PM
Post
#1
|
|
Newbie  Group: Members Posts: 27 Joined: 1-October 24 From: Sierra Vista, AZ. Member No.: 28,388 Region Association: Southwest Region  |
New to the type 4 and 914 world, Noticed that Empi has two cylinder heads available for the type four. has anyone used them yet? If so, how do they compare against the heads that are available? Cooling? Flowing? Quality? Are the Empi heads worth buying compared to what's out there now? In the type 1 world, Cima/Mahle cylinders seem to be what to use with good success. Are Cima/Mahle cylinders available for the type 4? If so, from whom or where? And while I consider Empi heads and Mahle cylinders, what about new type four cases? Are there new type four cases available? Or soon to be available? I know with the VW type 1 new cases solve many problems. Thank you for the time and information, Steve V,
|
   |
 
|
  |
Replies
| technicalninja |
Feb 1 2025, 09:13 PM
Post
#2
|
|
Advanced Member Group: Members Posts: 2,531 Joined: 31-January 23 From: Granbury Texas Member No.: 27,135 Region Association: Southwest Region 
|
Are new Mahle cylinders available in Europe?
I would have expected Mahle to move on and build new stuff as almost all of the OEM suppliers have done. My source for Mahle cylinders is OLD ones. I agree the Mahle is the best when it comes to steel jugs. Jake Raby mentioned new German built flywheels that were SO SOFT they went into the trash pile. Sometimes the ONLY good stuff is the OLD stuff... I also suspect there is only ONE foundry that is making the heads today. Everyone's heads are coming from the same place... |
|
|
|
Posts in this topic
Mr.Vman Empi heads and Cima/Mahle cylinders Jan 31 2025, 06:01 PM
914Sixer Here is where a lot of people shop. Pretty much e... Feb 1 2025, 09:10 AM Mr.Vman Thank you for sharing AA parts, no doubt another s... Feb 1 2025, 03:46 PM Dave_Darling I haven't heard of any source for new Type IV ... Feb 1 2025, 08:59 PM
JamesM
Everyone's heads are coming from the same pl... Feb 1 2025, 10:25 PM Rob@EMPI
Everyone's heads are coming from the same p... Feb 4 2025, 12:20 PM technicalninja
Everyone's heads are coming from the same p... Feb 1 2025, 11:36 PM Craigers17 I've been hanging out a bit on Jake Raby's... Feb 2 2025, 06:03 AM JamesM
"The benefits will be vast."
Under... Feb 2 2025, 05:36 PM technicalninja Thanks, @Rob@EMPI
It's good to have multipl... Feb 4 2025, 03:36 PM porschetub I noticed Stoddard are current selling 2.0 heads @... Feb 5 2025, 01:26 PM Eric_Shea We've switched to the EMPI heads on all of our... Feb 5 2025, 03:00 PM Mr.Vman The EMPI heads are available with larger valves? ... Feb 7 2025, 09:36 AM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd November 2025 - 10:27 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.