 New pedal set but accelerator cable disconnects, New ball socket required?? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| PaIsa |
 May 3 2025, 10:14 AM
Post
#1
|
|
Member  Group: Members Posts: 111 Joined: 13-June 24 From: Quebec, Canada Member No.: 28,180 Region Association: Canada  |
So I am finally getting close to the finish line of the work and getting ready to get the car back on the road after the winter here in Quebec, Canada.
Last thing I did was replacing the pedal set with a rebuilt set from Mr. Stone. Everything is fine with the clutch and brake, but my accelerator cable does not stay attached. The ball socket goes very easily on the new ball on the rebuilt pedal set so my guess on the culprit would be that the ball socket on the end of the accelerator cable would need to be replaced. Should I look elsewhere? Below is what I think should be replaced. Thanks  |
   |
 
|
  |
Replies
| Montreal914 |
May 3 2025, 10:20 AM
Post
#2
|
|
Senior Member Group: Members Posts: 1,818 Joined: 8-August 10 From: Claremont, CA Member No.: 12,023 Region Association: Southern California 
|
Reach out to Bruce @bdstone914 and he will let you know what to use.
I am not sure if it was for the accelerator cable, but a 911 piece there with a springclip is safer to use than the stock 914 part. Something simple is going on in your setup and shouild easily be fixed. I believe he is at Carlisle so he may not answer immediately... Good luck! (IMG:style_emoticons/default/driving.gif) |
|
|
|
Posts in this topic
PaIsa New pedal set but accelerator cable disconnects May 3 2025, 10:14 AM
BillC My guess is you've lost the little round reten... May 3 2025, 10:36 AM
porschetub
My guess is you've lost the little round rete... May 3 2025, 03:30 PM PaIsa For now I have ordered a new ball socket that shou... May 8 2025, 04:54 AM bdstone914
For now I have ordered a new ball socket that sho... May 8 2025, 06:05 AM PaIsa
Use a pick and try to rote the clip in the groov... May 8 2025, 06:20 AM Nate W There’s also another version of the socket avail... May 8 2025, 10:18 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 10:30 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.