Fog light wiring, Are these the right ones? Options

[Chad911sc]

Spent the last week refinishing the ground effects and the bumpers. Next step is to put fog lights back into the factory spot. I have the new 914 Rubber fog lights grilles and led lights to fit, but need to know if these are the right wires. And also if they are, how are they operated? Not sure if this car came with them from the factory, the car already had aftermarket plastic grilles in it and they were cracked and broken. My interior only has one light switch that is a pull switch that activates the headlights. I put my volt meter on the brown ground and the white/yellow positive, and no voltage going to them when light switch is pulled out. Are these the factory wires, or something else?

[Chad911sc]

10-4
I haven’t had the time to mess with it yet, but I hope to get to it later today. So what you’re saying is there is an actual plug up behind the dash that fits the stock fog light switch, and that makes it plug and play.
I figured that if put another horn on the passenger side it would work, but I also have to figure out why my horn isn’t working as well. I pulled the horn button and touched the two wires together, but do not get a 12v signal to the either the left or right side. It’s always this way with these 60/70’s cars that I build. Nothing works…lol