WEBER 40 - 914-6 or 911T Carbs, They seem to be the correct carbs but not stock? Options

[ctc911ctc]

1970 914-6 all stock

All,

I am down to the last thing for this engine re-fresh: CARBS

They seem to be in very good condition and since they are missing the Porsche factory mark I am guessing that they were 'cored' on a rebuild sometime prior to my ownership

OR

Are 914-6 carbs NOT market like 911 carbs are???????

Anyway, I have not gone too deep since they are in great shape - the gaskets seem good, the floats are the brass kind but in perfect shape, the bowls are very clean,,,,,,

Can I get some direction on:

1. what to look for in a recently rebuilt carb
2. where is a good reference for setup prior to installation

Any other opinions would be well received,

Thank you Teeners


YES I KNOW

(IMG:style_emoticons/default/thisthreadisworthlesswithoutpics.gif)



Pictures will be added later

[rgalla9146]

Those are replacement newer production carbs.
The previous owner (to me) was in failing health.
I suspect his wife had a local shop replace the carbs so he might be able to drive it.
It was dormant for more than 15 years plus another five in my posession
As a side note, I see it has larger venturies (stock were 27mm)
I'd check all the other changable 'adjustment' parts and compare to stock.
Rory