Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Chances of fixing ECU issue by checking Ohm's etc ?, stock 1.7 D-jet ECU
Literati914
post Jun 17 2025, 09:27 AM
Post #1


Advanced Member
****

Group: Members
Posts: 2,238
Joined: 16-November 06
From: Dallas, TX
Member No.: 7,222
Region Association: Southwest Region



The problem - I have a stock 2.0L d-jet ECU that starts and runs my 1.7L engine just fine, though I suspect that the engine's running too rich with it .... and I've read of the wrong ECU causing hydro-lock to these engines. So, I'm kind of afraid to even start the engine on this ECU.

I purchased a used 1.7 ECU a few weeks back - $40 off the Samba but there were no guarantees as the guy said he purchased an old VW repair shop that it came out of and had no idea if it worked.

So, I vaguely remember a video posted (somewhere?) where the guy was diagnosing a no start issue by running through all the pins of the ECU and checking Ohm's, continuity etc. I can't find the video now unfortunately. I know there's a special D-jet testing machine - but would finding an off electrical value not allow for repair inside the ECU? I haven't opened this 1.7L unit up yet - it may have obvious damage. I was wondering if it's even worth breaking open?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
Superhawk996
post Jun 17 2025, 10:39 AM
Post #2


914 Guru
*****

Group: Members
Posts: 7,767
Joined: 25-August 18
From: Woods of N. Idaho
Member No.: 22,428
Region Association: Galt's Gulch



You need to figure out what 1.7L system you have

The 73’ 2.0l system did use the 1.7L ECU but with a unique MPS, CHT, and CHT resistor for the 2.0L

The other year 1.7l use different ECUs

Spend the time to understand that components your using and use the Anders part chart and compatibility matrix

Generally speaking parts are not mix and match

Attached Image
User is online!Profile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 2nd April 2026 - 11:14 PM
...