FS: Stumbled on a large stash of 914 stuff, need ideas on how to proceed Options

[914rrr]

I found a large stash or 914 parts. The owner of said 914 parts is primarily into 911's and 356's and needs room in his warehouse. He wants to get rid of everything 914 related but I think his price for the entire lot is overly optimistic, especially since the 914 stuff is intertwined with all his other P Car stuff and the days/weeks worth of my time to sort through it all, move it store it, etc.

Most of the stuff is "OK". For example:
Qty. 20 - 1.7 or 1.8 heads (a couple were rebuilt)
2 or 3 tail shifter trans
2 pairs of late doors (appear to be fairly rust free)
2 late engine lids
2 or 3 Targa tops
2 or 3 used rear bumper pre 75-76, 1 has louvers punched in the license plate area
1 dash that was somehow recovered in a veined vinyl (not a bad job but is pulling away on the bottom of the pod
3 or 4 1.8 air box tops and flappers
1 used Bursch? muffler
2 pairs of 914 seats with non stock velour inserts (one with matching reddish "radwood-ish" door panels
1 stock front valence
1 or 2 stock rear valence
1 W engine block, possibly NOS but he might keep
Bunch or used signal and side marker lenses, 1 US rear lens
Stack of repro door jamb metal, maybe 6
2 fair under dash pads
Stack of used fair to good door panels
Bunch of door locks, latches, plates
Ton of "smalls"
etc. etc. etc.

The seller was open to taking payments. I'm thinking more like "buy as you go". I'm open to ideas, partners, group buys, etc.

[914rrr]

I'm really curious, who does / did a 914 vinyl dash recover / overlay with an elephant hide-ish vinyl fabric that was somehow glued / molded over the exiting OE molded vinyl?

It was in a box like it came from a business. Whoever did it did a pretty good job as there were no wrinkles I could see and the vinyl fabric used was pretty thick. The only drawback was the vinyl fabric overlay had shrunk / pulled up a bit from the bottom of the pod area nearest the windshield.