![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
s13u74cr4 |
![]()
Post
#1
|
Newbie ![]() Group: Members Posts: 37 Joined: 2-September 23 From: PNW Member No.: 27,558 Region Association: Pacific Northwest ![]() |
My 73 has the original steering wheel. Looking at a few threads, I gather 360mm is stock. Thing is I am 6'2". Have no problem fitting in the 914 itself, but the steering wheel is awkward at best. Can another member who is similarly tall post a photo of another smaller wheel as they sit in the drivers seat? Thinking a 350mm may solve my problems? Though looking at other photos maybe obscure the gauges a little. Still better then having my knees on the sides of it!
|
![]() ![]() |
DC_neun_vierzehn |
![]()
Post
#2
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 567 Joined: 16-November 20 From: Coastal Delaware Member No.: 24,893 Region Association: MidAtlantic Region ![]() ![]() |
@GregAmy what size space did you use (.5", 1", 2", etc.)?
Also, can you share a pic of the steering column from the side so I can see how you have it stacked? |
GregAmy |
![]()
Post
#3
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 2,551 Joined: 22-February 13 From: Middletown CT Member No.: 15,565 Region Association: North East States ![]() ![]() |
what size space did you use (.5", 1", 2", etc.)? Remember, our cars have a bit of a dish and offset stock, so these not only compensate for losing that with a flat wheel, but also for my personal driving preference. Street car. I sit with the seat only slightly forward from dead back to get the correct comfy knee extension. In looking at this photo, I'm not only using a 3" extension and JWest's 16mm thick eccentric, but also an LTB Autosport 1" extension: ![]() Race car. I sit bolted to the floor in a thin Butler aluminum seat. It, too, is almost all the way back to the firewall, and tilted more supine such that the headrest is detached to get my head below the roll hoop. 3" spacer, OPM 2" spacer, and JWest 16mm eccentric. But notice, since I'm sitting on the floor, I have the eccentric moving the wheel down: ![]() This photo below is what I used as a guide to decide how much in spacing I wanted in that car. This is how I prefer to drive. ![]() |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 4th September 2025 - 12:47 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |