![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
Mike1981 |
![]()
Post
#1
|
Member ![]() ![]() Group: Members Posts: 257 Joined: 21-July 14 From: Phoenix Member No.: 17,663 Region Association: Southern California ![]() |
Hello Everyone.
Finally getting back to working on my 1971 914. When I bought it the turn signals did not work. The headlights and taillights work. (When key is in ignition and in on position) I took it out for a ride, and parked it in my garage. The turn signal stalk was left in the right turn position. Later that night I checked on the car, and found the right turn signal was on steady. (Only when key is off car not running) So, both left and right turn signal light steady when key is off but not when key is on or car running. Apparently the wiring is not broken. Can someone help ID the relay for the turn signal flasher on this board its a 1971 If so, does anyone know where I could source one? Thanks everyone... Attached thumbnail(s) ![]() |
![]() ![]() |
Spoke |
![]()
Post
#2
|
Jerry ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 7,222 Joined: 29-October 04 From: Allentown, PA Member No.: 3,031 Region Association: None ![]() ![]() |
I think you have some custom wiring going on with the turnsignals. There should be a flasher relay where the leftmost circle is and the floating can in the rightmost circle is a custom solution.
Looks like somebody did an end run by wiring in a different flasher relay instead of getting an OEM type. Pull that assembly out and install an EP26 LED-compatible flasher relay with C2 grounded. ![]() |
Mike1981 |
![]()
Post
#3
|
Member ![]() ![]() Group: Members Posts: 257 Joined: 21-July 14 From: Phoenix Member No.: 17,663 Region Association: Southern California ![]() |
[quote name='Spoke' post='3220527' date='Aug 21 2025, 10:32 PM']
I think you have some custom wiring going on with the turnsignals. There should be a flasher relay where the leftmost circle is and the floating can in the rightmost circle is a custom solution. Looks like somebody did an end run by wiring in a different flasher relay instead of getting an OEM type. Pull that assembly out and install an EP26 LED-compatible flasher relay with C2 grounded. Thanks but the pic you are referring to is not the set up I have it is in the pic above |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 22nd August 2025 - 12:29 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |