Injector Cleaning Options

[Olympic 914]

Injector cleaning

Looking for injector cleaning business suggestions.
I have 4 2.0 injectors that I would like to send out for testing.

Back story:
I was battling a surging issue and sent four of my spare injectors out for cleaning and testing. I checked each with a 9V battery before sending and they all clicked.

I first looked at Witchhunters, which I had used before, but they went out of business. On their website they recommended Advanced Injector in KS. So I packed them carefully in bubble wrap and shipped them off. When I got them back they were loose in a flat rate box with some papers towels shoved into the box. Not individually wrapped just rattling around in the box.

I installed them and the car would not run at all. Since I was having other issues I checked everything else before pulling those injectors and tested them with a can under them. 3 did not flow at all. And after removing them I found they would no longer click.

So I put my old injectors back in, and the engine ran.
I don’t know if they will work now since they don’t click. I thought about tapping them with a plastic hammer. And trying the 9V battery thing again.

But in the meantime, I would like a couple suggestions on places other than Advanced Injectors in Kansas, whom I do not recommend.

[fiacra]

I've used Mr. Injector three times now. Excellent customer service, well packed on return, overall a good experience. My only concern with my 914 and then my Super Beetle injectors was that he sends them back with straight hoses on them and springs to put inside so that the hoses don't kink when you bend them. At least with the SB that didn't work because of space constraints. If I send him any more injectors that require a curved hose I'll either tell him not to install hoses on the injectors, or perhaps send him the pre-formed hoses to install. I just got my Volvo injectors back from him and he did a great job for a reasonable price with a fairly quick turnaround.

Anybody else have experience with a service that does a good job and actually puts the correct hoses on them when they refurbish them? Not sure if that is an option from any of the refurbishing services.