LM-1 Data log, MPS/AFR Options

[rfinegan]

I wired up the O2 and the LM-1 with a new Tach channel (I need a TPS for throttle position/load next)

I think this a a cruise speed , with a little more throttle in near the end.

The full stop (3/4 to wot)seems to be about 12.1 or so ( I am liking that ok) NOT SEEN ON THIS SESSION


MPS looks lean on cruise/ part load
Head temp gets hot on light cruise about 60 MPH

This tool seems to have a lot of features for the $$$ and still works well for being so OLD!

Maybe some decel/over run here too on the graph, I need t make notes on the recordings, not EZ for 1 person that is the driver.

[Ishley]

I integrate O2 data that I capture on my PC with 123+ Distributor data captured on my phone simultaneously . You have to have the blue tooth version of the 123. Using time stamps form each source I can connect the data. I chart it and can see where I go lean and look at the other variables for why... and can make tweeks to the MPS from there.

Just another option to fill in the picture using data.