Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> troubleshooting stalling when idling hot, idle/mixture adjustment?
timofly
post Jul 29 2026, 01:03 PM
Post #1


Member
**

Group: Members
Posts: 175
Joined: 21-February 09
From: VA
Member No.: 10,082
Region Association: MidAtlantic Region



'74 2.0 with .010 oversize cylinders, original Jetronic fuel injection intact and works great 95% of the time. However, engine idles very slowly (almost off the bottom of the tach scale) and will eventually stall unless throttle is "goosed". Condition only occurs in high ambient temps after 15-20 minutes driving. Then hard to start without a bit of throttle, but starts fine with that little bit of throttle, so I don't think it's fuel vaporization. (Fuel pump has been moved forward and fuel lines are all SS.)

Runs normally otherwise. Cylinder head temp sensor? Idle adjustment? What? Any ideas would be appreciated.

Tim
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
914werke
post Jul 29 2026, 01:16 PM
Post #2


"I got blisters on me fingers"
**********

Group: Members
Posts: 11,712
Joined: 22-March 03
From: USofA
Member No.: 453
Region Association: Pacific Northwest



On top of the AFM is a recessed screw to adjust idle mix.
it will have IDK 12 or 14 discernible detent's. Verify where its currently set and
increase adjustment as necessary 1 at a time
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
90 User(s) are reading this topic (89 Guests and 0 Anonymous Users)
1 Members: Alden

 



- Lo-Fi Version Time is now: 29th July 2026 - 04:55 PM
...