Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Mechanically Freshening a '74 1.8
andrewvolsen
post Nov 15 2026, 10:26 PM
Post #1


Member
**

Group: Members
Posts: 73
Joined: 6-December 09
From: Santa Barbara
Member No.: 11,099
Region Association: Central California



I recently purchased this ‘74 and a large pile of spare parts. It was partially restored and is badged as a 2.0, has front and rear sway bars, etc. The engine is an EC case with non-2.0 heads and Weber carbs. I was told it was rebuilt to a 2056, but the guy who was working on it isn’t able to answer any questions about it (sad story), so I don’t really know what it is now or what the car started as.

It had been sitting for at least a year when I picked it up. I got it running last weekend and drove it around the neighborhood. It pulled pretty hard - felt like more power than I remember in my past 1.8s. While working on the carbs I noticed that the engine had no cooling flaps under the tin and it was leaking alot of oil from the bellhousing.

This weekend I pulled the drivetrain out of the car and stripped it down to a long block. Here’s what I noted during the disassembly:
  • cracked tabs on exhaust
  • of gear oil in the bellhousing, appears to be from trans input shaft seal
  • clutch disc contaminated with gear oil
  • shift rod welds cracked
  • flywheel teeth damaged
  • no air flow flaps or thermostat
  • intake manifold phenolic spacer cracked through at cylinder 2

Any suggestions on what caused the mangled flywheel ring gear teeth? The teeth on the starter pinion gear look pretty normal. Should I replace the flywheel?

I was previously posting about this car here, but the project scope has grown beyond the title of that thread: http://www.914world.com/bbs2/index.php?sho...379606&st=0


Attached thumbnail(s)
Attached Image Attached Image Attached Image Attached Image Attached Image Attached Image Attached Image Attached Image Attached Image Attached Image Attached Image Attached Image
User is online!Profile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
6 User(s) are reading this topic (5 Guests and 0 Anonymous Users)
1 Members: JamesM

 



- Lo-Fi Version Time is now: 16th November 2026 - 12:56 AM
...