Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Inconsistent idle (73 2.0 D-jet), It's driving me crazy
DC_neun_vierzehn
post Nov 19 2026, 02:28 PM
Post #1


Senior Member
***

Group: Members
Posts: 696
Joined: 16-November 20
From: Coastal Delaware
Member No.: 24,893
Region Association: MidAtlantic Region



A new problem recently arose ... when I take my '73 (2.0 Dj-jet FI) out for a spin (cold start) it starts up fine and idles fine at 1,000 RPMs. Idle screw all the way in. I've had a 123 dizzy for a couple of years. 1,000 is the lowest I could ever get it to idle, but it's always idled steady at 1,000. No issues.

But now, I'll drive it for 10 mins on an open road then and come to a stop sign. When I come to a stop, the idle doesn't come down to 1,000. Instead it only drops to 2,000 RPMs and stays there at idle. Sometimes when I stop, it drops to 1,800 and idles there. Other times it's 1,600. It's different each time I stop, but usually in the 1,600 to 2,000 range.

But while stopped, if put the car in 1st gear and let off the clutch a little to pull the RPMs down to 1,000 and then put it in neutral it will stay at 1,000 RPMs for idle as it should.

Also odd is that if I drive the car for 30, minutes or 45 minutes or an hour and turn the car off to run into a store for 5 minutes, when I start the car back up (hot start) and drive it, the idle issue will sometimes go away. In fact, sometimes it will idle at 800 in those instances. It's driving me crazy.

I performed a smoke test. No vacuum leaks.

I had a NOS decel value and put that on. Made no difference.

FYI the has a Bowlsby FI harness and a Bowlsby rebuilt MPS. But those parts have been on the car for a couple of years now.

What could be causing the idle issues?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
Tom_in_NH
post Nov 19 2026, 05:39 PM
Post #2


Newbie
*

Group: Members
Posts: 24
Joined: 21-August 22
From: FL
Member No.: 26,792
Region Association: None



Could be the decel valve sticking open. Also, the fact that it idles at 1000 rpm with the idle screw all the way in, indicates other issues, such as an inop idle control valve.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
4 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
1 Members: 913B

 



- Lo-Fi Version Time is now: 19th November 2026 - 08:45 PM
...