 911 oil temp/pressure guage, need wiring help |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Trekkor |
 Mar 2 2005, 11:47 AM
Post
#1
|
|
I do things...  Group: Members Posts: 7,809 Joined: 2-December 03 From: Napa, Ca Member No.: 1,413 Region Association: Northern California  |
I have the guage in the car and the temp side is wired.
It's the pressure and idjit light that I need help with. New wires are run from the senders to the guage. What wire goes where? I have four wires. One off the idiot sender and three off the pressure sender. Help me help myself. (IMG:http://www.914world.com/bbs2/html/emoticons/wink.gif) Attached image(s) 
|
   |
 
|
  |
Replies
| Dave_Darling |
Mar 2 2005, 01:11 PM
Post
#2
|
|
914 Idiot Group: Members Posts: 14,991 Joined: 9-January 03 From: Silicon Valley / Kailua-Kona Member No.: 121 Region Association: Northern California 
|
This is from a six-cylinder engine, right?
As I recall, the 911 engines had separate senders for the oil pressure warning light and oil pressure gauge. It is possible that I'm only remembering info that applies to some years and yours is a different year... OK, the 71, 73, and 82 wiring diagrams on Pelican all say separate senders for light and gauge, and one wire plugged into each sender. So I'm out of ideas. Try asking on some 911 forums. --DD |
|
|
|
Posts in this topic
trekkor 911 oil temp/pressure guage Mar 2 2005, 11:47 AM
Aaron Cox ok...all the gauges are labeled. they need 3 thing... Mar 2 2005, 12:15 PM lapuwali Three off the pressure sender?
There should be no... Mar 2 2005, 12:22 PM Aaron Cox <... Mar 2 2005, 12:29 PM trekkor The temp side is already dialed htt... Mar 2 2005, 12:31 PM trekkor oh, and the wire colors shown mean nothing. Just f... Mar 2 2005, 12:33 PM lapuwali I've never seen a pressure sender that looked ... Mar 2 2005, 12:44 PM trekkor Soooo, in my pic, let's say the white is groun... Mar 2 2005, 12:45 PM ! The gauge I had did not work with the sender on th... Mar 2 2005, 12:47 PM ArtechnikA need more data...
what year is your combo gauge? ... Mar 2 2005, 12:58 PM lapuwali Mar 2 2005, 01:07 PM Aaron Cox the hot tip is to get the vdo dual post sender. on... Mar 2 2005, 01:13 PM ArtechnikA http://www.914world.com/bbs2/ht... Mar 2 2005, 11:45 PM ArtechnikA Mar 3 2005, 05:48 AM lapuwali Mar 3 2005, 10:37 AM trekkor http://www.914world.com/bbs2/ht... Mar 3 2005, 10:51 AM ! Call Dave at GPR....800-321-5432 ext 502 Mar 3 2005, 10:57 AM
type47fan Mar 3 2005, 08:19 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st June 2024 - 03:37 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.