 what could this mean?, oil spray in the engine compartment... |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| red914 |
 Mar 8 2005, 10:16 PM
Post
#1
|
|
...i believe in coyotes and time as an abstract...  Group: Members Posts: 862 Joined: 8-February 04 From: poulsbo, washington Member No.: 1,641  |
it isn't very much, but a bit of oil is being sprayed up in the engine compartment. i got to drive the teener a good bit today, and when i checked the oil midway, i saw evidence of oil being sprayed up against the rain tray. (IMG:http://www.914world.com/bbs2/html/emoticons/unsure.gif) not much, but spattering about on top of aircleaners, very small puddles on top of engine, that sort of thing. couldn't see from where it came. (IMG:http://www.914world.com/bbs2/html/emoticons/confused24.gif)
ran like a top, btw. (IMG:http://www.914world.com/bbs2/html/emoticons/driving.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/aktion035.gif) any ideas? is it bad, and if so, how bad? |
   |
 
|
  |
Replies
| red914 |
Mar 9 2005, 09:47 AM
Post
#2
|
|
...i believe in coyotes and time as an abstract... Group: Members Posts: 862 Joined: 8-February 04 From: poulsbo, washington Member No.: 1,641 |
hmmm... i am guessing the amount of venting is ok, simply because this is the first i've noticed it, and i have done longer, harders runs in the car, even since going to two carbs vice just one. or is that deduction wrong?
dipstick tube crack: i'll investigate that one, though one of the places oil seems to collect is on the top of the dipstick handle flange. fan housing: i don't think it is any where near the fan, as the oil pattern inside the compartment is not fan-like. it is more splattered against the bottom of the rain tray, on the driver's side. i need to check the filer base gasket, but that will have to wait until this evening. time to chase the kids off to school, then get myself off to work. thanks for all the input. one more reason why this club RAWKS. (IMG:http://www.914world.com/bbs2/html/emoticons/aktion035.gif) i'd never be able to keep my car running without it. (IMG:http://www.914world.com/bbs2/html/emoticons/driving.gif) thanks, all. (IMG:http://www.914world.com/bbs2/html/emoticons/clap.gif) |
|
|
|
Posts in this topic
red914 what could this mean? Mar 8 2005, 10:16 PM
scott thacher spray like that maybe something around the fan. th... Mar 8 2005, 10:19 PM red914 oh, good idea! i shold have mentioned that it... Mar 8 2005, 10:25 PM mharrison Check out this:
http://www.914world.com/bbs2/inde... Mar 8 2005, 10:29 PM airsix I've had a problem like this on both 914's... Mar 9 2005, 12:07 AM rhodyguy shane, look around the base of the oil fill tower,... Mar 9 2005, 12:15 AM HarveyH A few years ago I had a problem with an oil spray ... Mar 9 2005, 06:52 AM red914 Kevin, the oil pressure sending unit looks pretty ... Mar 9 2005, 08:47 AM vsg914 Your venting is correct. I agree the filler base g... Mar 9 2005, 08:56 AM mike_the_man Do you have a PCV valve in the oil filler neck? C... Mar 9 2005, 09:24 AM Cap'n Krusty Sounds to me like case pressurization, not enough ... Mar 9 2005, 09:26 AM URY914 Here is a strange one you may look into...
I had ... Mar 9 2005, 09:27 AM Flat VW Perhaps too simple but "over-filled" engine oil wi... Mar 9 2005, 09:47 AM HarveyH Each of the heads has a vent pipe that connects to... Mar 9 2005, 12:46 PM
eg914 I had a similar experience. Oil was coating the b... Mar 10 2005, 01:03 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 13th July 2025 - 07:55 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.