 How much variation in Deck Height, do you tolerate? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| nebreitling |
 Mar 10 2005, 05:06 PM
Post
#1
|
|
Member Emeritus  Group: Members Posts: 3,314 Joined: 26-March 03 From: San Francisco Member No.: 478  |
title says it all. How much variation between cylinders in Deck Height do you builders tolerate? i'm shooting for no more than .001, but i'm curious how steadfast i need to be in this...
damn KB 96's stick out of the jugs, mmm, just a little bit... current deck height: #1 -.204 #2 -.203 #3 -.215 #4 -.214 Desired deck height: 055-056 off to have the machinist whittle out some .25 cylinder spacers (!).... (IMG:http://www.914world.com/bbs2/html/emoticons/givemebeer.gif) |
   |
 
|
  |
Replies
| MarkV |
Mar 11 2005, 04:48 PM
Post
#2
|
|
Fear the Jack Stands Group: Members Posts: 1,493 Joined: 15-January 03 From: Sunny Tucson, AZ Member No.: 154 Region Association: None |
I should expain that the one 59cc combustion chamber is different than the other three because it has been repaired & welded by the PO.
|
|
|
|
Posts in this topic
nebreitling How much variation in Deck Height Mar 10 2005, 05:06 PM
Demick I assume you missed a decimal place in those numbe... Mar 10 2005, 05:16 PM MecGen Hi Dude
Both motors I did, stuck to the 001 - 002.... Mar 10 2005, 05:16 PM Demick Hold on a sec. If the KB's stick out of the b... Mar 10 2005, 05:18 PM bondo Hmm, what if he didn't miss a decimal place bu... Mar 10 2005, 05:33 PM Britain Smith Well, my engine called for a 0.09 shim but I am ru... Mar 10 2005, 06:06 PM nebreitling well, it would appear that i may have the wrong pi... Mar 10 2005, 06:23 PM lapuwali Mar 10 2005, 11:34 PM nebreitling i agree! i assume he meant 002...
still, it ... Mar 10 2005, 11:58 PM MarkV Question?
I measured my deck height and it is .01... Mar 11 2005, 04:44 PM MecGen Ummm
My way is to always match head CCs first and ... Mar 11 2005, 04:58 PM MarkV When I took it apart the PO had installed head gas... Mar 11 2005, 05:03 PM MecGen I don't know....
I really wouldn't do it l... Mar 11 2005, 05:12 PM fiid Basically - as long as your BBQ has brakes on the ... Mar 11 2005, 05:13 PM MarkV ... Mar 11 2005, 05:18 PM
bondo I'd get that head repaired right, or replace i... Mar 11 2005, 05:27 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 3rd June 2024 - 04:51 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.