 Ride Height, Front end to low ? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| dralf |
 May 11 2005, 06:18 AM
Post
#1
|
|
Member  Group: Members Posts: 230 Joined: 24-January 04 From: Dayton, Oh Member No.: 1,597  |
Good Morning,
I am planning to get my teener's front end aligned this Saturday and I have a some concerns and questions. It seems to me that my front end is to low. The measurement from the “doughnut” is 5 inches, and the back doughnut is 6.5 inches to the floor. I have tried to raise the car with the adjustment screws but at full travel that only raised the car a quarter of an inch. I suspect the PO did something with the torsion bars. Now my questions are: 1- Is this front to back height difference the reason the car “feels” a bit unstable at higher speeds? 2 - Is this 1 ½ difference between the front and back a problem? 3 - If so how or what do I do to get the front end or adjusters up back into the 6 inch range? |
   |
 
|
  |
Replies
| dralf |
May 11 2005, 11:11 AM
Post
#2
|
|
Member Group: Members Posts: 230 Joined: 24-January 04 From: Dayton, Oh Member No.: 1,597 |
(IMG:http://www.914world.com/bbs2/html/emoticons/type.gif)
Went to lunch before I had a chance to post my reindexing question. Looks like you guys had a chance to respond. I think I have enough info to venture into redoing the ride height....naturally I have hopes and dreams of driving that car all of next weekend if the weather is nice. But knowing my luck I will break something trying to adjust the height or find that I have sagging torsion bars. Thinking of that co-ed from my school days, I do not think that was a problem back then. (IMG:http://www.914world.com/bbs2/html/emoticons/cool.gif) |
|
|
|
Posts in this topic
dralf Ride Height May 11 2005, 06:18 AM
redshift My car is about 4 all around.. tiny bit higher in ... May 11 2005, 07:43 AM Andyrew Do you mind scraping the front end on driveways? N... May 11 2005, 08:03 AM skline If you are concerned about it and want to change i... May 11 2005, 08:38 AM SLITS May 11 2005, 08:49 AM skline May 11 2005, 09:09 AM ! Yeah, SLITs should be familiar with things that sa... May 11 2005, 09:10 AM redshift LMAO SHITS!
M May 11 2005, 09:58 AM SLITS And for maximum adjustment, take a pry bar and pry... May 11 2005, 10:06 AM ! May 11 2005, 10:10 AM dralf http://www.914world.com/bbs2/htm... May 11 2005, 10:48 AM skline When you get the car up on jack stands, use a jack... May 11 2005, 10:59 AM Mueller May 11 2005, 11:01 AM TROJANMAN while readjusting the front torsion bars, would it... May 11 2005, 11:33 AM ! Depends...you have the front end in the air....pul... May 11 2005, 11:35 AM TROJANMAN i thump over bumps, so i know i need shocks. but ... May 11 2005, 11:40 AM
dralf http://www.914world.com/bbs2/h... May 11 2005, 01:56 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 6th June 2024 - 01:17 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.