/6 wired goodies, What don't I need? Options

[Dr Evil]

I am figuring out my /6 wiring and can not find the diagrams for the following items:
RPM sensor
RPM transducer
Radio noise supressor

Can I use the regulator on the /4 board?

All of these were originally on the console in the back of the 911. I am keeping the CIS if that matters. Do I need to keep these items? How did you/would you do it?

Thanks

[ClayPerrine]

QUOTE (Dr Evil @ May 11 2005, 01:44 AM)

I am figuring out my /6 wiring and can not find the diagrams for the following items: RPM sensor RPM transducer Radio noise supressor Can I use the regulator on the /4 board? All of these were originally on the console in the back of the 911. I am keeping the CIS if that matters. Do I need to keep these items? How did you/would you do it? Thanks

All that stuff is mounted on the /6 relay board. You either learn to live without it, or find a /6 relay board and the sensors. I did the latter. If you do that, you have to wire an adapter from the /4 harness to the /6 relay board. The factory made these for the 72 /6, but they are like hens teeth, impossible to find.

I Know that Jon Lowe had the wiring diagram for one of the adapters,but I don't have any contact info for him anymore.

Or you can do what I did, rewire the harness to match the relay board. (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif)