 ground strap, could this be why it's not starting? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| vmills |
 Jun 7 2005, 10:55 PM
Post
#1
|
|
Newbie  Group: Members Posts: 39 Joined: 5-May 05 From: Andover, MA\Watertown, WI Member No.: 4,033  |
I was wondering if there's a ground strap on the transmission or engine. I get spark when I pull a plug wire and put a plug on and ground it, and I'm 95% there's fuel and compression, so I'm wondering if it's not sparking when I put the plug wire back on the plug that's in the engine.
Pictures, help, anything is appreciated thanks vic |
   |
 
|
  |
Replies
| ThinAir |
Jun 7 2005, 11:28 PM
Post
#2
|
|
Best friends Group: Members Posts: 2,569 Joined: 4-February 03 From: Flagstaff, AZ Member No.: 231 Region Association: Southwest Region 
|
Here is a picture of the ground strap. There is a lug welded to the bottom of the trunk where one end is attached. The nose cone bolts can be seen in the upper right picture here. They are the 3 bolts at the top of that photo. Even though it's a Wevo trans, it will give you an idea of what to look for.
You definitely need this. I forgot to attach mine after reinstalling my engine. It would barely turn over and I couldn't start it. After I attached the strap all was good! |
|
|
|
Posts in this topic
vmills ground strap Jun 7 2005, 10:55 PM
Bleyseng The ground strap goes from the nose cone bolts to ... Jun 7 2005, 10:58 PM vmills nose cone bolts? Where are those? Jun 7 2005, 11:00 PM Bruce Allert Go under the car from the rear and look up on the ... Jun 7 2005, 11:13 PM vmills Thanks, greatly appreciated.
I'll look at it t... Jun 7 2005, 11:14 PM SirAndy Jun 7 2005, 11:14 PM Joe Sharp The bolts that hold the part of the tranny that ha... Jun 7 2005, 11:15 PM Andyrew If for some reason you dont have a ground strap. I... Jun 7 2005, 11:56 PM ThinAir914 Jun 8 2005, 12:05 AM Rand If it cranks strong, I wouldn't think the grou... Jun 8 2005, 01:12 AM xsboost90 yeah mine wouldnt crank right, i ran a ground fro... Jun 8 2005, 05:56 AM vmills Hmmm...
Our engine cranks fine, and we used one of... Jun 8 2005, 10:23 AM vmills I have another question quick which might help me ... Jun 8 2005, 10:35 AM Bruce Allert Are you asking in what sequence?
Looking at the d... Jun 8 2005, 11:12 AM Mueller Jun 8 2005, 11:15 AM vmills I actually looked in haynes - couldn't find it... Jun 8 2005, 11:48 AM
MarkG A popular modification with the 'other Axis... Jun 8 2005, 12:48 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd April 2026 - 04:27 PM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.