 zero brake pad clearance?, advice appreciated |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| boiledcabbage |
 Jul 28 2005, 08:13 PM
Post
#1
|
|
Member  Group: Members Posts: 50 Joined: 23-May 05 From: Ottawa, Canada Member No.: 4,131  |
(IMG:http://www.914world.com/bbs2/html/emoticons/sad.gif) Any suggestions on what to do? the RR outboard pads have zero clearance to the disc and I can't seem to make the outboard adjuster do anything - brakes seem to work fine (other than the sticking pads) - is it likely a seized piston? if so what are my options?
have already considered big hammer help! (stock white 74 1.8 - if I ever get technologically with it I'll post a pic) |
   |
 
|
  |
Replies
| boiledcabbage |
Aug 2 2005, 06:46 PM
Post
#2
|
|
Member Group: Members Posts: 50 Joined: 23-May 05 From: Ottawa, Canada Member No.: 4,131 |
thanks all for the advice - have managed to 'back off the outer piston with the help of a c-clamp - turns out the locknut of the adjuster had been 'welded' to the inner adjustment screw = no wonder it wouldn't adjust!
the piston is still sticky but its driveable - for now - and its a beautiful evening... |
|
|
|
Posts in this topic
boiledcabbage zero brake pad clearance? Jul 28 2005, 08:13 PM
Eric_Shea You could remove the caliper (or at least take it ... Jul 28 2005, 08:18 PM boiledcabbage thx for the advice - I'll give it a try and ho... Jul 28 2005, 09:05 PM Eric_Shea Let me know if I can help. Not to be pesimistic..... Jul 28 2005, 09:18 PM Travis Neff Are you removing the plastic cap (has a hex head o... Jul 28 2005, 09:58 PM SGB Also, check the PP tech article
brake pad article
... Jul 29 2005, 07:18 AM Eric_Shea Inner Adjusters:
Clockwise = Moves the piston "Out... Jul 30 2005, 09:22 AM
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th July 2025 - 01:31 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.