 Indexing Distributor drive gear, How do I do it?? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| swood |
 Aug 16 2003, 07:36 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,839 Joined: 6-February 03 From: Strong Beach Member No.: 251 Region Association: None  |
Indexing the crank and cam is simple, but I don't see any similar peen marks or dots that will tell me how to set it in correctly. I'm about to put the case halves together and I'm assuming that I should have this set correctly prior too doing so.
|
   |
 
|
  |
Replies
| swood |
Aug 19 2003, 04:59 PM
Post
#2
|
|
Senior Member Group: Members Posts: 1,839 Joined: 6-February 03 From: Strong Beach Member No.: 251 Region Association: None |
Tan-Q!
And one more thing. That orientation will set the drive shaft and the rotor to fire at #1 TDC, but what designates the 360 degree rotation of the distributor body? I know, I'm reading the directions on the dist, but I don't see this. I know it gets rotated when setting the dwell angle, but never having done this before I am just grasping at straws. It's a mallory unilite w/vac adv. by the way. |
|
|
|
Posts in this topic
swood Indexing Distributor drive gear Aug 16 2003, 07:36 PM
type47 you can put in the drive gear later. bring to TDC ... Aug 16 2003, 07:57 PM swood Hmphh...My Hanes guide and other P-book took a wal... Aug 19 2003, 02:39 PM tryan offset slots pointing to 11:00 as you look at it f... Aug 19 2003, 02:44 PM Dave_Darling Picture: Aug 19 2003, 03:44 PM swood DD: the image you posted reminded me of the downlo... Aug 19 2003, 09:23 PM
Dave_Darling To tell which cylinder you're on TDC for, pop ... Aug 20 2003, 12:11 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 10th June 2024 - 09:19 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.