 trailing arm bushings, How to remove? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Qarl |
 Aug 24 2003, 05:29 PM
Post
#1
|
|
Shriveled member  Group: Benefactors Posts: 5,233 Joined: 8-February 03 From: Florida Member No.: 271 Region Association: None   |
Okay... I spent the weekend disassembly the rear suspension.
Oh yeah, my suspension was all off the car. F-ING CASTELATED NUTS!!!!! It took quite a few sessions with a propane torch and a high-torque impact wrench on max setting to remove each one. It's real fun removing this nut without the car mounted to anything. The hub and axle just rotate away!!! I ended up placing the hub (still mounted on the trailing arm with the axle attached into a vise on my bench). I tried removing it with a socket extension and 24" breaker bar. No such luck. The heat and impact wrench worked after many repeated attempts. My teeth are sore from clamping down. Okay.. so now I just have to remove the hub and bearings. No problem. What about the bushings? I plan on installing Muellers needle bearings in the rear, but I have no idea how to get the old stuff out. Any advice? |
   |
 
|
  |
Replies
| Qarl |
Aug 24 2003, 08:58 PM
Post
#2
|
|
Shriveled member Group: Benefactors Posts: 5,233 Joined: 8-February 03 From: Florida Member No.: 271 Region Association: None |
Did you puncture through the rubber or just whack the metal shaft?
|
|
|
|
Posts in this topic
Qarl trailing arm bushings Aug 24 2003, 05:29 PM
Brad Roberts Press. Or its a mess with propane torch/burning th... Aug 24 2003, 05:34 PM Qarl Since, I don't have a press... just find a sho... Aug 24 2003, 05:39 PM Brad Roberts Not really.. just ask them to press them out.
You... Aug 24 2003, 05:42 PM Charles Deutsch <... Aug 24 2003, 05:43 PM URY914 I took a hammer (BFH) and beat the shit of of them... Aug 24 2003, 07:17 PM fiid Heres how I did it:
Get the trailing arm on a ben... Aug 24 2003, 07:20 PM URY914 Invite Jenna Jamison over... Aug 24 2003, 07:49 PM vortrex burned mine out in less than 20 min each. get the... Aug 24 2003, 08:30 PM J P Stein Fire is gud.
Protect the threads & whack the mofo... Aug 24 2003, 09:43 PM vortrex puncture through the rubber. Aug 24 2003, 09:44 PM Scott Carlberg <... Aug 25 2003, 03:32 AM Brad Roberts FYI:
Protect the threads on the shaft (if you pla... Aug 25 2003, 09:16 AM
tryan a three arm gear puller and a bunch-o-sockets wor... Aug 25 2003, 10:37 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 26th October 2025 - 12:46 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.