 No holes for sway bar..., What size hole saw ?? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Korijo |
 Sep 5 2003, 03:32 AM
Post
#1
|
|
[]D o [] o []V[] o []D  Group: Members Posts: 1,308 Joined: 16-July 03 From: North Bend, WA Member No.: 914  |
I searched, but no luck.
Bought a 1 1/16" hole saw (all my old ones are worn out), but it seems too small next to the Tarret bar. What size do I need ?? |
   |
 
|
  |
Replies
| ChrisFoley |
Sep 5 2003, 05:42 AM
Post
#2
|
|
I am Tangerine Racing Group: Members Posts: 8,030 Joined: 29-January 03 From: Bolton, CT Member No.: 209 Region Association: None 
|
1 1/16 is close to 27mm which would be big enough for up to about a 22mm bar, as long as the hole is well centered. If you don't want to buy a bigger hole saw you can open up the hole with a carbide burr in a die grinder.
Are you welding a reinforcement inside, below the gas tank? |
|
|
|
Posts in this topic
Korijo No holes for sway bar... Sep 5 2003, 03:32 AM
Ira Ramin Dave,
The bar OD is 1”, which will be pretty tig... Sep 5 2003, 07:17 AM Qarl :o Are there instructions? My Smart Racing bar ha... Sep 5 2003, 07:20 AM Bruce Allert Hey there Dave, I just installed a stock sway a fe... Sep 5 2003, 07:25 AM Korijo I dont have any existing holes, so I cant go the d... Sep 5 2003, 01:00 PM ChrisReale Davre, If I remember correctly, the tarett bar is ... Sep 5 2003, 01:30 PM DNHunt Hey my hearing has finally cleared up. When's ... Sep 5 2003, 02:01 PM Korijo Dave,
I think Chris and Kevin are coming next wee... Sep 5 2003, 02:35 PM Jeroen Dave,
Tarett bar needs a 1.125" hole saw
(got the... Sep 5 2003, 05:16 PM Jeffs9146 I hope you don't mind but I am going to tag on... Sep 5 2003, 05:27 PM Jeffs9146 #2 Sep 5 2003, 05:28 PM Jeffs9146 #03 Sep 5 2003, 05:29 PM Jeroen Hey Jeff,
Yep, get a new inner reinforcement plat... Sep 5 2003, 05:37 PM Korijo Jeff,
Looks like someone didn't notch the she... Sep 5 2003, 05:38 PM Jeffs9146 QUOTE
Bruce Allert Was talking to a guy at our last AX about just ins... Sep 5 2003, 07:04 PM Jeffs9146 QUOTE
Brad Roberts Jeff... weld a nut back on the plate. Its not a bi... Sep 8 2003, 10:20 AM Brad Roberts Wait.. I dont get it.. (and your pics dont show it... Sep 8 2003, 10:22 AM Jeffs9146 They cut the bottom of the plate off! So it ha... Sep 8 2003, 10:25 AM Brad Roberts My welding looks like crap.. but the plate looked ... Sep 8 2003, 10:39 AM Jeffs9146 Yes, I cant find it either! I remember seeing ... Sep 8 2003, 10:45 AM Jeroen Here is another pic (showing the same) that Andy j... Sep 8 2003, 11:23 AM Jeffs9146 That one doesn't look welded in! Can I get... Sep 8 2003, 11:33 AM Brad Roberts I welded Jenny's because it was a stock bar an... Sep 8 2003, 11:44 AM Jeffs9146 So welding is not nessary??
Jeff Sep 8 2003, 12:16 PM Brad Roberts Not if you have the back plate like what you have.... Sep 8 2003, 12:19 PM Bruce Allert Well ain't that sumpin!!! I actual... Sep 8 2003, 01:56 PM
-P- I just did mine this weekend. Lots of fun with the... Sep 8 2003, 03:46 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th June 2026 - 03:24 AM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.