 no power, until 2800 |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| toon1 |
 Mar 19 2006, 03:50 AM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,849 Joined: 29-October 05 From: tracy,ca Member No.: 5,022  |
It will kinda stumble and miss with a real lack of power until about 2800. After that it pulls strong.
I set the timing the on Fri. at 3500 rpm and the mark on the fan linned up in the v groove on the housing. I rebuilt the dist. last night but only removed the nut holding it to the case. I it possible with the rebuild, the timing is different?? (IMG:http://www.914world.com/bbs2/html/emoticons/confused24.gif) |
   |
 
|
  |
Replies
| Joe Ricard |
Mar 20 2006, 10:02 AM
Post
#2
|
|
CUMONIWANNARACEU Group: Members Posts: 6,811 Joined: 5-January 03 From: Gautier, MS Member No.: 92 |
One thing I found wrong with my 1.7L FI dizzy was the electrical contact between the advance plate. Once I cleaned it up and adjusted the tension of the spring and contact it was much better.
ANY vacuum leak will affect how the engine manages fuel specially the MPS function. |
|
|
|
Posts in this topic
toon1 no power Mar 19 2006, 03:50 AM
solex I believe that the groove represents TDC on #1 you... Mar 19 2006, 07:28 AM bd1308 wiring, mps dying, connections, vac leaks...
hwo ... Mar 20 2006, 08:46 AM Joe Ricard YOU ARE DOING IT WRONG
and I have no idea what mo... Mar 20 2006, 09:02 AM toon1 the motor runs ok when first started. I did find a... Mar 20 2006, 09:45 AM toon1 what elec. connection are you refering to? Mar 20 2006, 10:24 AM
toon1 Here's what I came up with.
after resetting ... Mar 21 2006, 09:34 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 12:00 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.