Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Any one have trouble w/ KEP pressure plates?, Mine won't release all the way???
wbergtho
post Mar 29 2006, 08:43 PM
Post #1


Senior Member
***

Group: Members
Posts: 1,314
Joined: 28-April 03
From: Roberts, WI
Member No.: 623



(IMG:http://www.914world.com/bbs2/html/emoticons/confused24.gif) My KEP 240mm Stage 1 pressure plate is not releasing and I've checked all the obvious things like a broken spot weld on the Boden tube (firewall & attachment by shifter), pedal box bushings, clevis, clutch cable,...etc. All the these items are great. I watched the Boden tube while actuating the clutch and it is still. The clutch won't release enough to allow gear selection while the engine is running. With the engine off, I can select all gears no problem (brand new gearbox). The car ran well and the clutch seemed to function properly for about 200 miles...then it quit releasing all the way...and found myself double clutching & matching revs to get it home. I then tightened the cable thinking it must have stretched under the strain of the KEP pressure plate..and it still won't release. I then used the "cave man" approach to determine whether the pressure plate will release manually or not. I disconnected the clutch cable @ the trans and slid a long pipe over the lever arm and cranked it over to it's maximum travel...had a friend hold it there while I got in the car (up on stands)...I fired it up and checked to see if it was released entirely and it was. It shifted into all gears properly with engine running. My question is...WHY can't I get enough clutch cable travel to actuate the pressure plate entirely...when it WAS working flawlessly for 200+ miles??? I'm starting to think that there may be something wrong in the disc, or pressure plate broken or cracked diaphram, or maybe the pilot bearing has failed causing the main shaft to spin with the engine? I won't be sure until I take everything apart and inspect these parts. Can anyone think of any thing else I may be overlooking? (IMG:http://www.914world.com/bbs2/html/emoticons/wacko.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/headbang.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/confused24.gif)

Thanks,

Bill
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
wbergtho
post Mar 30 2006, 07:31 PM
Post #2


Senior Member
***

Group: Members
Posts: 1,314
Joined: 28-April 03
From: Roberts, WI
Member No.: 623



Hey Tim,

How's your project? My trans has been shortened to the 76/77 early specs. Did you have to change the length of the lever arm @ the pedal box to give you extra cable travel necessary to engage/disengage? Are you using the KEP stage 1 or stage 2? Mine is a stage 1 and I am told by the Kennedy people that coupled with a stock disc, it will take 550 ft pds of torque. I am at about 470 so feel I'm OK there. We'll see. My pedal effort is so huge...I afraid my left leg will break under the strain! (IMG:http://www.914world.com/bbs2/html/emoticons/mad.gif)

As far as KEP taking your PP back...I know they will refund you your money...but they would obviously rather fix it and send it back...Only thing is...I'm F____G sick and tired of sending shit back and forth to them. I"VE DONE IT 5 TIMES ALREADY! Plus a flight out there once. I wouldn't blame you if you just demanded your cash back. (IMG:http://www.914world.com/bbs2/html/emoticons/confused24.gif)

I have read the threads on hydraulic clutches and am starting to reconsider whether to proceed with one. I will only go that route if i know the pedal effort will decrease BIG TIME...Otherwise, I'll just live w/ a cable. (IMG:http://www.914world.com/bbs2/html/emoticons/wacko.gif)

Rock on, (IMG:http://www.914world.com/bbs2/html/emoticons/aktion035.gif)

Bill
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 15th June 2024 - 12:46 PM