 HELP!, /6 Alternator gurus needed. |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Series9 |
 Apr 26 2006, 11:57 PM
Post
#1
|
|
Lesbians taste like chicken.  Group: Members Posts: 5,446 Joined: 22-August 04 From: DeLand, FL Member No.: 2,602 Region Association: South East States  |
The late alternator I got for Liz doesn't fit. It's about .5" too thick.
I'm trying to install an internally regulated alternator in a '77 engine. Anyone? I'll be in SoCal the next two days and will bring the alternator with me. If anyone has a Carrera alternator I could see, I would be appreciative. |
   |
 
|
  |
Replies
| sixnotfour |
Apr 27 2006, 07:57 PM
Post
#2
|
|
914 Wizard Group: Members Posts: 10,822 Joined: 12-September 04 From: Life Elevated..planet UT. Member No.: 2,744 Region Association: Rocky Mountains 
|
3 diff. depths, early fan housings, all 3 same overall dimension outside. front to back.
There is 3 different thickness ,28mm/19mm/7mm, this is measured with calipers from your shiny surface to to back side. I have cut em deeper no problem, I used a cnc mill, and a lathe (scary). oh ya grounded through harness and needs a ground wire from alt. to the engine hope this helps upper left housing is the deeep one Attached image(s)  
|
|
|
|
Posts in this topic
Series9 HELP! Apr 26 2006, 11:57 PM
Britain Smith Yea, to install a late model Carrera internally re... Apr 27 2006, 12:24 AM Series9 Why is there no mention of that in this Porsche bu... Apr 27 2006, 06:30 AM Gary That bulletin is for the -SC alternator. The later... Apr 27 2006, 06:48 AM Gary Oh, and you'll also need to notch the air defl... Apr 27 2006, 06:50 AM Gint This is good stuff. Any more tips?
:bump: Apr 27 2006, 05:34 PM davep I thought the alternator grounded through the fan ... Apr 27 2006, 05:40 PM Series9 This has been very informative.
Thanks guys.
Any... Apr 27 2006, 10:28 PM davep Are there not different diameters as well? I know ... Apr 28 2006, 08:58 AM Britain Smith The fan blades are different diameters but the hou... Apr 28 2006, 01:03 PM Gint This thread needs a... :bump: Apr 28 2006, 07:28 PM
Series9 The housing is at the machine shop to be 'corr... May 1 2006, 03:32 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 01:58 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.