 VDO Head Temp Sensor, Need help want to use 6 on a 6 |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| seanery |
 Feb 21 2003, 02:17 PM
Post
#1
|
|
waiting to rebuild whitey!  Group: Retired Admin Posts: 15,857 Joined: 7-January 03 From: Indy Member No.: 100 Region Association: None  |
Ok, here's my dilema and question.
I have one of these VDO Head Temp Sensors and 6 leads. I want to be able to monitor each head's temp. I'm running webers and thought this would be a handy thing to help figure out if/which one were running too lean. They work off impedance or resistance, don't have the part here or I'd go into detail. What kind of switch, etc. would work without giving unreliable results? ( I don't want 6 guages) Any thoughts, comments, experience? |
   |
 
|
  |
Replies
| Brad Roberts |
Feb 27 2003, 04:16 PM
Post
#2
|
|
914 Freak! Group: Members Posts: 19,148 Joined: 23-December 02 Member No.: 8 Region Association: None |
You will not tune a engine using head temps. Plug readings, EGT or 02. EGT will give you individual cylinders as well as plug readings. 02 will give you all 6 unless you run 6 O2's.
Just being honest: I think your heading down the wrong path for what you want to do. B |
|
|
|
Posts in this topic
seanery VDO Head Temp Sensor Feb 21 2003, 02:17 PM
Mueller EGT would be a much better parameter to monitor.
... Feb 21 2003, 02:33 PM gklinger Take a look at the 6 position switch: http://www.f... Feb 21 2003, 02:35 PM seanery I didn't wanna drill holes in my pretty jh coa... Feb 21 2003, 03:17 PM seanery This is their response:
Dear Sir: In reply to yo... Feb 27 2003, 12:59 PM Dave_Darling BTW, the thermocouple senders (that's what tho... Feb 27 2003, 01:41 PM Alfred Dave,
Your avatar scares me almost as much as Zoi... Feb 27 2003, 01:47 PM SirAndy <... Feb 27 2003, 02:38 PM SirAndy oh, also, remember that electrical resistance chan... Feb 27 2003, 02:46 PM J P Stein Me thinks Meuller is right. Head temps are not goi... Feb 27 2003, 02:47 PM seanery OK JP & Mike,
Is your theory because the heads wi... Feb 27 2003, 03:40 PM J P Stein What Brad said....I got's to get to wurk....sh... Feb 27 2003, 04:20 PM Dave_Darling Aaaaahndy sez: dave, there is no wire, no matter ... Feb 27 2003, 05:04 PM Brad Roberts How long did you wear it, and did you ask them to ... Feb 27 2003, 06:26 PM
Dave_Darling Only a few minutes--they were just going to get th... Feb 27 2003, 08:33 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st July 2025 - 01:20 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.