Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> ride height, how high or low
41ghost
post Apr 10 2007, 05:23 PM
Post #1


Member
**

Group: Members
Posts: 235
Joined: 13-July 04
From: noblesville,in.
Member No.: 2,345



took the car all apart this winter and put a 911 frontend on and 5 lug in the rear also, with many other changes too. what is the correct or a good ride height with 16" wheels if the wheels matter. where do you measure from , the longs?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
flesburg
post Apr 10 2007, 10:10 PM
Post #2


Senior Member
***

Group: Members
Posts: 506
Joined: 22-November 04
From: Pontiac, IL
Member No.: 3,162



Rich has it right for front height.

Only one addition. Your rear trailing arms should be as close to level as you can get them. You do not want the hub to be higher off the ground than the pivit point at the forward end of the trailing arm. This can be measured with the car on the ground.

Then get it four wheel aligned, (toe, camber and caster in the front, and toe and camber in the rear) and corner balanced with you setting in the drivers seat. You can only achieve good corner balance with adjustable height spring perches in the rear.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 10th June 2024 - 09:56 AM